Walnut Sand Blaster Car Engine Carbon Intake Valve Deposition Cleaning Machine

Description: Description:AUTOOL HTS558 is a de-carbon device for intake valve cleaning, whose working principle is to blast the walnut media into the intake valve through high-pressure airflow. The carbon deposits on the valve and cylinder wall impacted down. The walnut media and carbon deposit mixture can be recycled through special joints.It can deeply remove the sticky carbon deposits on the intake manifold, intake valve and exhaust valve. Effectively solve the problems of unstable idling, insufficient air intake, insufficient power, and insufficient acceleration. What is walnut powder(sand)?(1)Crash walnut shell into powder, after a vigorous selection process then we get walnut sand. It show high performance in the three area: hardness, anti-pressure, wear-resisting. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. (2)It was hardly dissolved in acid, alkali and water. (3)Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition, it will clean intake pipe and back side of intake valve thoroughly but no damage. What is carbon deposition? There are some hydrocarbon olefin residues attach on engine intake,cylinder when fuel burn in engine not completely. These residues change into hard black shell in high temperature condition , that called carbon deposition. Why need clean carbon deposition? Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...all the thing will hurt engine deeply. So normally we should clean carbon deposition after every 40000-50000 kilometer trip. Why do we choose the walnut powder to clean the deposit? 1. Chemical cleaning agent will corrodes pipe and shortens the lifetime of engine.2. Walnut powder is pure natural polish material. It show high performance in hardness, anti-pressure and wear-resisting. Walnut powder hardness was lower than metal but higher than carbon deposition. Take these advatages, AUTOOL HTS558 will clean clean intake pipe and back side of intake valve thoroughly but no damage. Walnut Sand De-carbon Clerner Automotive Walnut Sand DE-Carbon Cleaner is a advanced equipment for clean engine intake carbon deposition. Keeping engine in healthy status, make sure engine provide high quality power constantly. Deep removal of carbon deposits: Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.) External air source: This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently. Built-in dust filter: It can separate the recovered walnut sand grit from carbon deposits for recycling. Integrated design: The walnut sand grit can be sprayed and recovered simultaneously. Recommend: Air pump pressure should more than 0.7Mpa (7bar/102PSI). Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB). Cleaning time between 1-3 minutes. Functions: High Efficiency : When the high-pressure air flow and walnut sand are injected into the closed engine intake manifold, they will roll and collide rapidly inside, forming a closed loop of continuous injection and suction, so as to quickly remove the carbon deposits inside. Safe and Undamaged : Walnut sand can deeply remove sticky carbon deposits on intake manifold, intake valve and exhaust valve without damaging them. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts. Integrated Design : When the sprayed walnut sand impacts and deposits carbon, the walnut sand particles will be recycled in the equipment at the same time, without manual recycling, saving time and effort. Built-in Filter Screen : Built in filter screen can separate the recycled walnut gravel from the carbon deposit for secondary utilization. Practicality : The overall structure design is simple and light, beautiful and compact, and has strong practicability. With universal pulley, it can move 360 ° in all directions, which is convenient and labor-saving. External Air Source Design : The use of external air source can provide continuous external power during the cleaning work, so as to promote the walnut sand particles to more strongly impact the carbon deposition in the pipeline, and more comprehensively complete the carbon deposition removal work. How to use?1. Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2-4KG ), press dust guard on walnut powder then close cover; 2. Join spary gun muzzle and recycle hose together (there is a hole on recyclehose);3 Remove intake manifold of engine, plug spary gun into intake, turn crankshaft to close intake valve. Connect high pressure air pump((not include)) to HTS558; 4. Connect AC power, start clean. The process should last 1-3 minutes(depending on carbon deposition circumstances); 5. Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times(depending on carbon deposition circumstances). Specifications Applications:All vehicle Rated Voltage:110V/220V Rated Frequency:50/60HZ Capacity:13L Rated Power:1200W Vacuum Suction:0.02MPa Air Flow:＜300L/Min Package Dimensions:400*400*540MM Weight:10KG Package include: 1pcs x Walnut Sand DE-Carbon Cleaner Machine 5pcs x Yellow Adapters suitable for various car models.(For GM, For Benz, For BMW, For Audi, For Land Rover.) 2pcs x Spray gun 1pcs x Goggles 1pcs x Recycle hose 1pcs x Recycle hose and spray gun connector

Price: 357.99 USD

Location: Bordentown, New Jersey

End Time: 2024-07-26T07:28:03.000Z

Shipping Cost: 0 USD