Description: The product is designed to control -source heat pump heaters. The multi-function design supports auxiliary heating function, waterflow warning, ventilation pump control, antifreeze function, sensors failures action, auto defrost and timer defrost function, auto restart function, exhaustion protections, compressor delay and pressure protections. Features: Multifunction Design: with waterflow auditing, ventilation pump control, sensors failures action function. Inquiry: Support checks the of all sensors, and the results keeps displaying for 3 seconds. Setting: support set the and with the setting ranges of 10℃-70℃, the factory setting is 40℃. Two Working Mode Design: there are two working modes of “AUTO" and "SAVE" for you to adjust. “AUTO" mode: keep heating according to the setting. "SAVE" mode: only heating within three set periods. You can adjust it to suit your needs. Multiple Control Function: Equipped with control, aux electrical heaters control, and ventilation pump control function. Winter Antifreezing & Auto Defrost & Timer Defrost Function: when the is ≤ 2℃, it will operate -freezing pumping, the pump runs 3 minutes for every 30 minutes; it will automatically stop when ≥ 3℃. When the is -9~0℃ starts defrosting, and when the is 2-30℃ stops defrosting. Multiple Protections & Warning Function: Support exhaust protections function, high pressure and low pressure warning and protections, compressor delay protections, and sensors failure warning. Auto Restart & Restore: with auto restart after off, support for on/off failure memory function, and support for recovery to factory settings. Specifications: Name: Heating Controller Material: printed circuit board Setting ranges: 10℃ to 70℃ Display ranges: -40℃ to 130℃ Working : 0-50℃ Storage : -10℃ to 60℃ Ambient humidity: 20-85%RH without dew : 220VAC ±10%, 50/60Hz Outputs: Compressor 30A; Heaters 8A; Others 3A Hysteresis: 2~10℃ sensors calibration: -9.9~ 9.9℃ energized from: -5~ 25℃ Defrost starting : 10- 90min Defrost starting : -9~0℃ Defrost stop : 2~30℃ Maximum defrost : 2-15min Exhaust protections : 50 ~ 125℃ Item size: Display panel: 86 * 86mm / 3.39 * 3.39in Mainboard: 105 * 90 * 35mm / 4.13 * 3.54 * 1.39in Package size: 225 * 185 * 65mm / 8.86 * 7.28 * 2.56in Package weight: 725g / 1.60lb Packing List: 1 * Mainboard 1 * Display Panel 4 * Sensors
Price: 62.8 USD
Location: Shen Zhen
End Time: 2025-02-09T14:32:30.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded/Generic
MPN: Does not Apply
ASIN: B0D3PSRBQX
Name: Water Heating Controller
Material: printed circuit board
Setting ranges: 10℃ to 70℃
Display ranges: -40℃ to 130℃
Working temperature: 0-50℃
Storage temperature: -10℃ to 60℃
Ambient humidity: 20-85%RH without dew
Power supply: 220VAC ±10%, 50/60Hz
Outputs: Compressor 30A; Heaters 8A; Others 3A
Hysteresis: 2~10℃
Water sensors calibration: -9.9~ 9.9℃
Heater energized from: -5~ 25℃
Defrost starting time: 10- 90min
Defrost starting temperature: -9~0℃
Defrost stop temperature: 2~30℃
Maximum defrost time: 2-15min
Exhaust protections temperature: 50 ~ 125℃
Display panel: 86 * 86mm / 3.39 * 3.39in
Mainboard: 105 * 90 * 35mm / 4.13 * 3.54 * 1.39in
Package size: 225 * 185 * 65mm / 8.86 * 7.28 * 2.56in
Package weight: 725g / 1.60lb
