POR-15 Stop Rust Kit, Non-Porous Coating Seals and Protects Metal from Rust

Description: Product SpecificationWHY CHOOSE POR-15 STOP RUST KIT – our 3-Step System stops rust permanently by creating a hammer- tough, non-porous surface that seals and protects metal from water, chemicals, salt, and other corrosive contaminants. Tested to 450°F and exceeded a 2,000-hour salt spray test. Also, resistant to acid and alkalis, & will repel fuels and oils.CLEANS, PREPS, & COATS METAL – At a cost-effective price for three premium POR-15 products, our stop rust kit has everything you need for amazing and permanent results. The POR-15 stop rust kit includes CLEANER DEGREASER to remove contaminants; METAL PREP to neutralize rust, etch metal & coat with a zinc phosphate surface; & RUST PREVENTIVE COATING for a permanent hammer-tough finish.APPLICATION – Clean the surface using POR-15 Cleaner Degreaser before applying POR-15 metal prep to the bare or rusted metal surface. Prepping the metal will provide the best surface profile and improve paint adhesion to any metal surface. Lastly, Apply the first coat to the properly prepared substrate with the supplied brush. Apply the second coat when the first coat is almost dry, slightly tacky to the touch. Contains a 4 oz can that will cover six sq ft with two coats.WHEN DO I NEED THIS? Restore small parts & projects such as small subframes, axle replacements, control arms, brake shields, and more. Preventing the spread of rust is essential if you wish to preserve the good looks of your vehicle, and to prevent further damage caused by corrosion.OUR SATISFACTION COMMITMENT – At POR-15 we strive to bring the ultimate in rust prevention. Known for the unbeatable 3-step stop rust system, POR-15 is trusted by DIY & Professionals. We are committed to innovation, quality control, and excellent customer service. POR-15 Rust Preventive CoatingUse as part of the POR-15 3-Step System for Permanent resultsThe ultimate rust preventive system for permanent corrosion protection. Shields metal in just 3 easy steps, clean it, prep it, and coat it.Step 1: POR-15 Cleaner Degreaser removes grease, oil, dirt & grime in one application without leaving residues, or flammable solvents.Step 2: POR-15 Metal Prep provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface.Step 3: POR-15 Rust Preventive Coating is a high performance coating designed for application directly on stable rust or seasoned metal surfaces.POR-15 Rust Preventive CoatingStop Rust and Corrosion PermanentlyPOR-15 Rust Preventive Coating REALLY Stops Rust Permanently! POR-15 Rust Preventive Coating is designed for application directly on prepped rusted, sandblasted, and seasoned metal surfaces. It dries to a rock-hard, non-porous finish that won’t chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture.Provides rust protection with a hammer-tough finish.Seals rust permanentlyNo need to remove rust before applyingLead-FreeFor metal substrates* Exceeds 2000 hour salt spray test* Tested over 450°F / 232°CRepels fuels and oils* Resistant to most acids and alkalisProper application of POR-15 Rust Preventive Coating using the 3-Step SystemStep 1: Clean it!Remove loose rust and degrease surface with water-based POR-15 Cleaner DegreaserStep 2: Prep it!Neutralize rust and etch it with POR-15 Metal Prep. Thoroughly wash with water and dry.Step 3: Coat it!When surface is dry, apply POR-15 Rust Preventive Coating right onto the rust with two or three thin coats!For areas exposed to U.V. light - Topcoat itTopcoat with POR-15 Top Coat, POR-15 2K Urethane, or other top coat of your choice. Top Coat the POR-15 Rust preventive while it is tacky for proper adhesion.* LABORATORY TEST RESULTSPOR-15 Rust Preventive Coating was tested for 168 hours at 97°F in a condensing humidity salt spray (ASTM B117). At the end of the test period, coated steel was free of rust or pitting. Acid and alkali resistance tests performed found panels coated with POR-15 Rust Preventive Coating to be impervious to gasoline, oil, chromic acid, hydrochloric acid, phosphoric acid, sodium hydroxide, caustic soda, 50% sulfuric acid, and 50% hydrofluoric acid. POR-15 Rust Preventive Coating was applied over a rusty substrate as a finish coat (approximately 23 mils dry film thickness). The coating showed essentially no undercutting at the scribed area after 2000 hours in a weatherometer*.A 2 mil thickness of POR-15 Rust Preventive Coating was applied to lightly rusted steel and then exposed for 1000 hours to a salt spray. At the end of the test period, no undercutting was observed at the scribed area. Recoatability is excellent. Laboratory tests have shown very good adhesion when applied up to 14 days after application of the first coat. In an actual Field test, a topcoat was applied 6 weeks after the first coat had been applied, and the intercoat adhesion was excellent as determined by a crosshatch tape test. A metal box used as a filter for raw sewage was coated with POR-15 Rust Preventive Coating and placed in service within a few hours after the interior and exterior were coated. No visible rusting occurred at the welded areas after a six month exposure.A POR-15 Rust Preventive Coating coating was subjected to 450°F for 10 hours; it remained hard and showed no apparent loss of adhesion. A panel subjected to elongation was pulled beyond the yield point of the base metal without affecting the POR-15 Rust Preventive Coating coating.* For more detailed lab test results contact P.O.R. Products

Price: 40.87 USD

Location: Cypress, Texas

End Time: 2024-02-16T07:56:28.000Z

Shipping Cost: 0 USD