LUXMAN L-507Z INTEGRATED AMPLIFIER SILVER AC100V NEW FROM JAPAN

Description: LUXMAN L-507Z INTEGRATED AMPLIFIER SILVER AC100V NEW FROM JAPAN Description ⬛︎ Condition: New Please confirm the condition by reviewing the images carefully. ⬛︎ Product Overview of UXMAN L-507Z Design and Exterior: - Utilizes a high-response meter unit with white LED illumination for a needle-type analog meter. - Features a 7-segment LED for volume level display with excellent visibility, centrally located between large left and right meters (can be turned off). - Boasts a thick front panel with a blaster white finish and a refined aluminum hairline finish on the top panel. Electrical Circuits and Functions: - Equipped with Luxman's original new amplification feedback engine, LIFES 1.0, replacing ODNF (newly adopted after the flagship stereo power amplifier M-10X). - Employs a 3-stage Darlington 3-parallel push-pull configuration for high-power 220W + 220W (4Ω) rated output. - Features the new LECUA1000, an 88-step electronically controlled attenuator, minimizing sound quality degradation during volume adjustment. - Incorporates a discrete buffer circuit to powerfully drive the power amplifier connected to the preamplifier's output section. - Utilizes a high-regulation power transformer and large-capacity capacitors (10,000μF x 8) for a high-inertia power supply. - Includes electronic control bass/treble tone control and LR balance adjustment controlled by LECUA. - Introduces a newly developed phono equalizer amplifier circuit, allowing high-grade analog record playback without additional purchase. - Offers pre-power separation (separate) function enabling bi-amp configuration or coexistence with AV systems. - Features a mute button on the main unit to temporarily reduce volume without adjusting the volume knob (also operable with the remote control). - Equipped with low-resistance large speaker relays (in parallel configuration) and direct wiring to speaker terminals, supporting excellent speaker drivability. - Utilizes a beam line construction and a round pattern wiring board for optimal and short routes for transmitted audio signals and smooth current transmission. - Incorporates internal wiring with unique OFC wire, featuring each core spiral wrap shield and non-plated treatment of core wire for natural signal transmission. Mechanism and Accessories: - Employs an independent loopless chassis structure to isolate the rise in earth impedance due to chassis current and the influence of generated magnetic fields. - RCA input terminals (LINE-1) made of copper alloy with conductivity equivalent to copper and hardness comparable to brass. - RCA input/output terminals with an 18mm pitch to accommodate high-quality cables with large plugs (LINE-1 has a 20mm pitch). - Speaker terminals with an in-line (LR identical characteristics) layout, supporting easy attachment of thick cables and compatibility with Y lugs and banana plugs (A, B2 systems). - Headphone output with Φ4.4mm terminal for LR separation improvement, in addition to the standard Φ6.3mm terminal. - AC inlet with gold-plated finish and the ability to support cable weight by changing the installation direction. - Large gradient cast iron legs to protect delicate music signals from unnecessary vibrations. - Newly added control input/output terminals for coordinated remote operation of corresponding devices and potential future expansion to remote operation by other wireless devices. - Equipped with a new trigger input/output terminal for power interlocking between corresponding devices (3.5mm monaural jack/daisy chain possible). - Comes with a high-quality aluminum remote control capable of operating CD players (compatible with major Luxman CD players released since 1996). - Features a new non-twist structure power cable JPA-10000i with a slim design, evolved from thicker conductors for easier handling. Specifications: - Rated Output: 110W + 110W (8Ω), 220W + 220W (4Ω) - Inputs, Separate Inputs/Outputs: Line 4 systems, Phono 1 system (MM/MC switchable), Balance Line 2 systems, Separate Inputs/Outputs 1 system - Speaker Outputs: A, B2 systems (AB simultaneous output possible) - Amplification Circuit, Output Configuration: LIFES 1.0, Bipolar 3-parallel push-pull - Input Sensitivity/Input Impedance: PHONO (MM): 2.5mV / 47kΩ, PHONO (MC): 0.3mV / 100Ω, LINE: 180mV / 47kΩ - Total Harmonic Distortion: 0.007% or less (1kHz/8Ω), 0.03% or less (20Hz-20kHz/8Ω) - S/N Ratio, Frequency Response: LINE: 105dB or more, 20Hz-100kHz (+0, -3.0dB) - Power Consumption: 300W (Electrical Appliance and Material Safety Law), 86W (no input), 0.4W (standby) - Maximum Dimensions, Weight: 440 (W) x 178 (H) x 454 (including front knob 20, rear terminal 27) (D) mm, 25.4kg (main unit) - Included Accessories: Remote control (RA-17A), Power cable (JPA-10000i/with polarity mark) - Note: Φ4.4mm headphone output is a ground-separated connection by an unbalanced amplifier. Enjoy listening with high separation performance by independently wiring the left and right (-) signals with compatible headphones. - Note: Line cables are not included with this product. Please purchase separately. ⬛︎ Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ⬛︎ Items would generally be dispatched within 6 working days. ⬛︎ Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ⬛︎ Please note that for special items, or depending on the destination country, different shipping methods may be used. ⬛︎ Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ⬛︎ As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ⬛︎ Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. ⬛︎ Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. ⬛︎ These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ⬛︎ The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

Price: 4699.99 USD

Location: Komagne, Nagano

End Time: 2024-10-15T11:48:06.000Z

Shipping Cost: 0 USD