JAMMA Monitor Tester

Description: This is a small battery (CR2032) video tester / signal generator made specifically for testing arcade monitors in JAMMA cabinets. It is the size of a typical JAMMA fingerboard and can be easily carried around in your pocket for on the go testing. With an additional cabinet adapter (see my eBay store), a number of non JAMMA cabinet monitors can be tested as well. The tester supports the common 15kHz standard resolution, as well as the 24kHz medium resolution and 31kHz high resolution arcade modes, with JAMMA standard negative composite sync. The tester can be operated from the control panel (Player 1 Buttons 1 and 2) and can be powered by either the cabinet's power supply or the CR2032 battery. Here are some of the features of the JAMMA Monitor Tester: Battery Operated – about 3 hours battery life on a good quality CR2032 (depending on the battery / pattern / type of use / monitor) Generates the following video and sync signals:RGB and SYNC at 3V-ppNegative CSYNC – (JAMMA standard)Generates following arcade video modes:15kHz – standard arcade resolution for most monitors24kHz – medium resolution arcade video mode31kHZ – high resolution mode supported by newer chassisGenerates the following tests in each mode:Text – for raster direction / yoke polarityColor Grids Primary Colors – for color check and adjustmentColor Grids Primary and Secondary Colors – for color check and adjustmentCheckerboard – for geometry and convergence checks, white / black level / saturationGrid - for geometry checksConvergence Grid - for convergence checksPong - streaking testHollow / Filled Box – for bloom artifact checkMoving Crosshairs - geometry distortion checkVertical Primary Color Bars – for color check and adjustmentVertical Secondary Color Bars – for color check and adjustmentVertical Tertiary Color Bars – for color check and adjustmentScrolling Horizontal Color Bars – bloom and color uniformitySolid Full Screen White – for burn in and degaussingSolid Full Screen Red – for burn in and degaussingSolid Full Screen Green – for burn in and degaussingSolid Full Screen Blue – for burn in and degaussingAlternating Color Grid - color transitions / color saturation testAlternating Full Screen Color – burn in, degaussing, color transitionsRandom Color Grid - stability testing, demo mode, etc...Battery life indicator shows battery status through MODE LED.LED always on – full batteryDuration of on/off cycle indicates battery depletion level50% off/on blink – nearly deadTo operate the tester, connect the edge connector to your cabinet's JAMMA harness. Press the MODE button to cycle through the available video modes, and TEST to cycle through the tests. The tester can also be controlled from the cabinet control panel using PLAYER 1 BUTTON 1 (MODE) and BUTTON 2 (TEST). It is not necessary to have a working PSU to test the monitor (ON switch in the BATT position). If the cabinet does have a working PSU, the tester can be powered from the +5V rail of the JAMMA harness (ON switch on the PSU position). Shipping: I combine shipping. To receive combined shipping discount, click on the "request total" link in your shopping cart after you have selected your items. This feature works only with the web browser version of the eBay site, not on the mobile app. Shipping table for Europe / Asia / Australia may not be accurate. If you see high shipping prices check ahead to confirm shipping costs. Any excess shipping paid, will be refunded.

Price: 44.99 CAD

Location: Windsor

End Time: 2024-11-08T00:18:32.000Z

Shipping Cost: 15.15 CAD