4 Side H8 H9 H11 10000W 1000000LM LED Headlight Bulbs Conversion Kit 6000K White

Description: 4 Side H8 H9 H11 10000W 1000000LM LED Headlight Bulbs Conversion Kit 6000K White2x H11 LED High OR Low Beam Headlight Fog Bulbs Kit 6000K White Light H11 Super Bright LED Headlight Bulb Conversion Kit Replace Halogen High/Low Beam, Fog, DRL Headlamps 6000K White 4-Side Imported Chips Light Source, 360° Degree Emitting ! Pairs(2pcs) Package include:2x H8/H9/H11 LED Headlight Bulbs ( Built-in Driver Ballast ) Features: - Waterproof: IP68- Each Bulb have 4 sides of Super Bright LED Chips- Complete Kit: No Other Ballast/Driver Required Just Plug and Play - Newest Technology- Need additional Parts or Modification? 100% Integrated Design, Plug and Play. (Few vehicles may require load resistors to stop flickering or fix error message)- Smart Efficient Cooling System, Built-In Cooling Fans For Fast Heat Dissipation- High quality Aluminum heat dissipation ensures the secure temperature range- Low Power Consumption than Halogen bulb or Hid Kit, Energy Saving- Low Voltage Protection, High Precision Constant Current driver Chip The latest design of the led headlight ,whose luminous point is the same as the factory light, thus beam Pattern is flawless. Our LED headlamps advantages:- High brightness- Instant Startup- High temperature resistant- High purity of luminescence- Good stable performance- Instant on fast cooling- Energy saving environmental- Long lifespan(>50000hr)- LED lights than traditional halogen energy, more power.- Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.- Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable. Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .- Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .- LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !- Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K. These LED Headlights can be Used as High Beam,Low Beam,DRL,Fog Light and so on.It Depends on your original bulb.If your car's origianal bulb is used as High Beam,then it is used as High Beam.If the original bulb is used as Low Beam,then it is used as Low Beam.So just confirm your car's bulb model and then to see if it is suitable for your car or not.FREQUENTLY ASKED QUESTIONS,PLEASE SEE THE FOLLOWING SOLUTIONS- Both side could not work.Answer: Please turn around the plug (swap the polarity) and try again- One side could not work.Answer:1)please turn around the plug (swap the polarity) of the defective bulb and try again2)please exchange the bulbs from side to side and see if the problem could solve3)Please check your connection and fuse4)If still could not help, please contact our customer service, we will get back to you within 24 working hours- Both side flicker/interference/error light.Answer:Your car need a resistor Cancelers Decoders, you can contact our customer service for help.- My bulb type is H7, but the one you sent could not fit.Answer: Your car need a bulb holder to lock the bulb, you can get one from ebay according to you vehicle model.- My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip.Answer:Different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell.- The bulbs is loss and it could not fit(H8/H9/H11/9005)Answer: Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.PaymentDelivery detailsTerms of salesWelcomeContact usPayment 1.Please check the item after you receive it,please keep us posted if you have any confusion or porblems about your order .We will give you reply and best solution within 1 working day. 2.Pleasedon't leave any neutral/negative feedback or open a case when you have problems with our product , we promise to try our best to help and not let your interest be damaged.3.If you are satisfied with our product,please leave us a 5 stars positive feedbackand we will do the same for you. Delivery detailsSincerely thank you for choosing us, we suggest you reading our shipping terms and conditions.1.All items are shipped within 1-2 business days after we confirm your payment and your shipping address.2.We only ship our items to the areas that our logistics provider covers.3.To ensure you receive item safely, please offer the concrete and complete shipping address4.Please keep the consistency of the address from Paypal and eBay.5.Sometimes your order may be impacted by extreme bad weather, strikes or other unexpected events.6.If there are any problems with your order, including late delivery or being lost, please do not hesitate to contact us. We are happy to offer solutions to your inquiries.Terms of sales1.We accept PayPal only!2.Please keep the consistency of the address from Paypal and eBay.3.Payment must be received within 3 dayssince you won the item, or eBay will launch Unpaid Reminder Against you.Welcome Contact usIf you have any question,Please no hesitation to contact us via ebay message, we will reply you within 24 working hours.

Price: 11.3 USD

Location: Walton, Kentucky

End Time: 2024-12-12T08:00:34.000Z

Shipping Cost: 0 USD