12kw Solar Inverter DC 48V IP65 Output 120V/240V Power 2x60A MPPT Controller R

Description: 12KW Solar Off Grid Inverter 110/220Vac Low Frequency DC 48V AC Input 240V AC Output 120V/240V Split Phase Pure Sine Wave Power Converter,with 2x60A MPPT Charger Controller About this item：➤【GS Series Inverter 】Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system. The most common use for this inverter is emergency backup power or off-grid systems for residences, businesses and remote power needs. You’ll always be prepared for the next power outage with access to 12,000 watts of continuous power and 36,000 watts of surge.➤【120 / 240 Split Phase AC Output】12KW watts low frequency power inverter with transformer, 36kW watts Peak ,48 volts DC input.The inverter is split-phase and will output 110/120 Vac or 220/230/240 Vac, and it can output 50 or 60Hz via the dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet.➤【Features】Smart Remote Control, Automatic Generator Starting (AGS)when low battery voltage or no utility, Support 2 60A MPPT Solar Charger Controller.Maximum Battery charging 200AH. Smart fan adjustment(The fan automatically adjusts the wind speed according to the ambient temperature).➤【ETL certification to UL 1741 standards 】We strive to provide reliable, cost-effective clean energy products and power quality life.The GS Series Inverter by an ETL certification to UL 1741 standards ,This will be your best choice, You can buy it confidence.➤【Multi-protection】 Multi-protection against overload, short circuit, over-temperature, under & over voltage. Input and output are fully isolated from low frequency topology, AC output is synchronized in phase and in frequency with the AC input source to protect the inverter and load for seamless transfer. Item DescriptionGS Series InverterPure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system. The most common use for this inverter is emergency backup power or off-grid systems for residences, businesses and remote power needs.Important Safety WarningBefore using the unit, read all instructions and cautionary markings on: (1) The unit (2) the batteries (3) all appropriate sections of the manual.Solar Charger Mode SpecificationsThis Inverter Support 2 60A MPPT Solar Charger ControllerThe maximum solar charging current :2X60A=120AThe maximum charging current : 200A (2x60A MPPT+80A Battery=200A)Rated charge current:60ARated Battery voltage:48VDCInput voltage range:50-110VdcMax. PV open circuit array voltage:110VdcMax. recommended input power (W) :3500WYou can disable the inbuilt solar controller, connect with external solar controller, or use for other systems (it is not limited for solar system)Appliances in a home operate on AC current. Solar array generates DC current. A solar charge controller regulates DC power from solar arrays to charge the batteries. Batteries function as the “bank” where excess renewable energy is deposited and then later withdrawn when needed. An inverter is required to convert DC current from the renewable source to usable AC current for appliance and other home powering needs.Because there is variability in the renewable source, a generator is often incorporated into the system to charge batteries when needed. As the output of most generators is AC, an AC charger is needed to convert AC to DC for the purpose of charging the batteries. Essentially, off-grid solar inverter will regulate PV generation, convert power from DC to AC for consumption and AC to DC for charging.Package &DimensionsInverter Charger *1Remote LCD Panel *1Battery Temperature Sensor (BTS) *1User Manual *1Unit Weight: 137lbs/62kgSize: L x W x H: 24.7 x 16.4 x 8.05 inch / 627.5*416.5*204.5mm 12KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240V Automatic Generator Starting (AGS)when low battery voltage or no utility.Support 2 60A MPPT Solar Charger Controller.5 stages adjustable AC charging current. AC charging also can be closed.8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries）.5 stages adjustable AC charging current. AC charging also can be closed.Powerful Charge Rate Up to 200Amp, Selectable From 0%-100%.Built-in transfer switch and battery charge, backup or off grid power solutions.AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration.4-step Intelligent Battery Charging, PFC for Charger.Smart fan adjustment(The fan automatically adjusts the wind speed according to the ambient temperature).Remote control line can be connected (without accessories, optional accessories if needed). GS Series hybrid Inverter is designed to serve as a backup power supply for AC loads.The input power of GS Series hybrid Inverter comes from PV system and AC grid which not only supply power to AC loads but also charge the battery bank when the power from AC grid or AC generator is present (also known as Line Mode).In the event of AC grid (or AC generator) outage, the AC loads can be alternatively powered by PV system (if the illumination is sufficient) and battery bank.Earthing(ABYC standard)Inverter mode: the neutral and the earth joinedLine mode: the neutral and the earth separatedUse a Relay to realize the function.Smart fan AdjustmentThe fan automatically adjusts the wind speed according to the ambient temperatureLow Frequency Split Phase48 VDC input, 240V input VAC to 120/240V AC split phase output This low frequency unit is a combination of an DC to AC power inverter, battery charger and AC auto-transfer switch into one complete system Inverter Output SpecificationsContinuous Output Power: 12000 WattsSurge Rating: 36000 WattsOutput Wave Form: Pure Sine WaveOutput Voltage: 120/240VacNominal Efficiency: 90% (Peak)Line Mode Efficiency: >97%Output Frequency: 50Hz / 60Hz ± 0.3HzTypical Transfer Time: 15msTHD: <10%DCInverter Input SpecificationsNominal DC Input Voltage: 48.0VdcLow Battery Alarm: 42.0Vdc-44.0VdcLow battery Trip: 40.0Vdc-42.0VdcHigh Voltage Shut-down: 64.0VdcLow battery Shut-down Recovery:44.0 ± 0.8VdcHigh battery Shut-down Recovery:62.0 ± 0.8VdcIdle Consumption: 230 WattsNominal Input Frequency:50Hz / 60Hz (Auto detection)Charger SpecificationsOutput Voltage: Depends on battery typeBattery Initial Voltage for Start Up: 40-62.8VNominal Charge Current:12VDC model: Max 90A24VDC model: Max 70A48VDC model: Max 50AOver Charge Protection:Bat. V ≥15.5Vdc, Fault, Buzzer alarm for 12VdcBat. V ≥31.0Vdc, Fault, Buzzer alarm for 24VdcBat. V ≥61.0Vdc, Fault, Buzzer alarm for 48Vdc

Price: 2245.5 USD

Location: Los Angeles, California

End Time: 2024-09-18T15:58:32.000Z

Shipping Cost: 0 USD